Technical Data
Machine Features
Adopted the new type large energy laser power supply and laser generator,this machine has below properties:
stable performance and high welding energy for more thick wire than ordinary machine
Single laser pulse,waveform can be adjusted optionally,satisfy the demands for complex and special welding process;
Touch-screen interface,convenient and intuitive
Applied Industry
The laser welder for moulds is used in mould's repairing and welding industry,especially for precision injection mould and die casting mould. The repairment for sand hole.defect, overcut on the casting and processing work piece,welding for all kinds of metal products, such as the jewel,the machine performs excellently.
Product Features
After welding,no cracks,sand hole,scar,deformation,oxidation,suitable for mirror polishing,etching, etch, selects the corresponding welding parameters can make the welding pacts corresponding to nearly HRC60 degree of hardness.
![](/attachment/2017/07/76cf17b136.jpg)
Laser length | 1064nm |
Optical cavity | Import ceramic light-gathering cavity from UK |
Max laser power | 200W |
Pulse width | 0.1-20MS |
Laser frequency | 1-50Hz |
Beam range | 0.3-2mm |
Cooling system | 1.5P buit-one |
Working table travel | 125*100mm |
Rated power | 6KW |
Power requirement | 220v±5%/single phase/50Hz/30A |
80v±5%/three phase/50Hz/20A | |
Dimension | Machine:550*1200*1280mm |
Water chiller:540*650*780mm |
Machine Features
Adopted the new type large energy laser power supply and laser generator,this machine has below properties:
stable performance and high welding energy for more thick wire than ordinary machine
Single laser pulse,waveform can be adjusted optionally,satisfy the demands for complex and special welding process;
Touch-screen interface,convenient and intuitive
Applied Industry
The laser welder for moulds is used in mould's repairing and welding industry,especially for precision injection mould and die casting mould. The repairment for sand hole.defect, overcut on the casting and processing work piece,welding for all kinds of metal products, such as the jewel,the machine performs excellently.
Product Features
After welding,no cracks,sand hole,scar,deformation,oxidation,suitable for mirror polishing,etching, etch, selects the corresponding welding parameters can make the welding pacts corresponding to nearly HRC60 degree of hardness.
![](/attachment/2017/07/76cf17b136.jpg)
![](/attachment/2017/07/ba8844a870.jpg)